Onkyo TX-L50 Manual De Instrucciones página 62

> Before Start > Part Names
■ Audio Select
Select the priority for input selection when multiple audio sources are connected to one input
selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD" AUDIO
IN jack. The setting can be separately set to each input selector button. Select the input
selector to configure. Note that there are some default values you cannot change.
Audio Select "ARC": When giving priority to input signal from ARC compatible TV.
0 The setting can be selected only when "5. Hardware" - "HDMI"
- "Audio Return Channel" is set to "Auto" and also the "TV"
input is selected.
"HDMI": When giving priority to input signal from HDMI IN jacks
0 The setting can be selected only when the input is assigned to
the HDMI jack in the "1. Input/Output Assign" - "HDMI Input"
setting.
"COAXIAL": When giving priority to input signal from DIGITAL IN
COAXIAL jacks
0 The setting can be selected only when the input is assigned to
the COAXIAL jack in the "1. Input/Output Assign" - "Digital
Audio Input" setting.
"OPTICAL": When giving priority to input signal from DIGITAL IN
OPTICAL jacks
0 The setting can be selected only when the input is assigned to
the OPTICAL jack in the "1. Input/Output Assign" - "Digital
Audio Input".
"Analog": To always output analog audio independently of the
input signal
0 The setting can be selected only when the input is assigned to
the AUDIO IN jack in the "1. Input/Output Assign" - "Analog
Audio Input" setting.
(Default Value: BD/DVD: HDMI, CBL/SAT: HDMI, GAME: HDMI,
STRM BOX: HDMI, CD: COAXIAL, TV: OPTICAL, PHONO:
Analog)
> Install > Initial Setup > Playback
Supplementary Information |
PCM Fixed Mode Select whether to fix input signals to PCM (except multi-channel
PCM) when you have selected "HDMI", "COAXIAL", or
"OPTICAL" in the "Audio Select" setting. Set this item to "On" if
noise is produced or truncation occurs at the beginning of a track
when playing PCM sources. Select "Off (Default Value)"
normally.
0 Changing "Audio Select" changes the setting to "Off".
0 The setting cannot be changed when "TUNER", "NET", "USB" or "BLUETOOTH" input is
selected.
■ Video Select
When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input from
which video is displayed on the TV.
Video Select "Last (Default Value)": Select the video input played immediately
prior.
"BD/DVD", "CBL/SAT", "GAME", "STRM BOX", "CD", "TV",
"PHONO": Play the video from the selected input.
0 This setting is effective for an input selector which is assigned
in "1. Input/Output Assign" - "HDMI Input".
0 If the OSD language is set to Chinese, you can only select this setting when "TUNER" is
selected as input.
Advanced Setup | Others
E
N
61