Water Tank - Sima COBRA MKNO Manual De Instrucciones Original

6. INSTRUCTIONS FOR STARTING UP THE MACHINE.

6.1 WATER TANK.

The COBRA expansion joint saw has a
water tank cooling system that cools the blade
while the machine is in use. While filling the tank
close the valve.
6.2 OPTIONAL ADD-ON TANK.
For extra range an optional add-on tank is available.
Installation instructions.
1. Fix the water tank onto the handle using the quick release handle.
2. Close the valve and cut the refrigeration tube between the valve and the snap on connection.
3. Connect the additional fuel tank as shown in the picture.
ALWAYS CLOSE THE VALVE WHEN REFILLING THE TANK.
12
ENGLISH