Avoid Tipping; Keep Riders Off; Checking Wheel Bolts; Practice Safe Maintenance - Great Dane Scamper HG GBD10025 Manual Del Operador

Cortacésped
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

machine off if a child enters the mowing area.
• Use extra care when you come to blind corners, shrubs,
trees, or other objects that may block your vision.
• Do not let children or an untrained person operate the
machine.
• Do not carry or let children ride on any attachment or
machine even with the blades off. Do not tow children in a
cart or trailer.

Avoid Tipping

• Slopes are a major factor related to loss-of-control and
tip-over accidents, which can result in severe injury or
death.
• Drive across a hill - not up and down. If necessary, turn
slowly and in the downhill direction. Do not shift to neutral
and coast downhill.
• Avoid starting and stopping on a slope. If machine
stops, disengage mower blades and back down slowly.
• Do not drive where machine could slip or tip.
• Stay alert for holes and other hidden hazards in the
terrain.
• Keep away from drop-offs, ditches, and embankments.
• Slow down before you make a sharp turn or operate on
a slope.
• Mowing when grass is wet can cause reduced traction
and sliding.

Keep Riders Off

• Only allow the operator on the machine. Keep riders off.
• Riders on the machine or attachment may be struck by
foreign objects or thrown off the machine causing serious
injury.
• Riders obstruct the operator's view resulting in the
machine being operated in an unsafe manner.

Checking Wheel Bolts

• A serious accident could occur causing serious injury if
wheel bolts are not tight.
• Check wheel bolt tightness often during the first 100
hours of operation.
• Wheel hardware must be tightened to specified torque
using the proper procedure anytime it is loosened.
SAFETY

Practice Safe Maintenance

• Only qualified, trained adults should service this
machine.
• Understand service procedure before doing work. Keep
area clean and dry.
• Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
• Never lubricate, service, or adjust machine while it is
moving. Wait for all movement to stop on machine before
adjusting, cleaning or repairing.
• Keep safety devices in place and in working condition.
Keep hardware tight.
• On multi-bladed machines, be aware that rotating one
blade can cause other blades to rotate.
• Keep hands, feet, clothing, jewelry, and long hair away
from any moving parts, to prevent them from getting
caught.
• Disengage all power and stop the engine. Lock park
brake and remove the key. Let machine cool.
• Disconnect battery or remove spark plug wire (for
gasoline engines) before making any repairs.
• Before servicing machine, carefully release pressure
from any components with stored energy, such as hydraulic
components.
• Keep all nuts and bolts tightened, especially blade
attachment bolts.
• Securely support any machine elements that must be
raised for service work. Use jack stands or lock service
latches to support components when needed.
• Never run engine unless park brake is locked.
• Use care when checking blades. Wrap blades or wear
gloves and use caution when servicing them. Only replace
blades. Never straighten or weld them.
• Keep all parts in good condition and properly installed.
Fix damage immediately. Replace worn or broken parts.
Replace all worn or damaged safety and instruction decals.
• Grass catcher components are subject to wear,
damage, and deterioration which could expose moving
parts or allow objects to be thrown. Check components
frequently and replace with manufacturer's recommended
parts when necessary.
• Charge batteries in an open, well-ventilated area, away
from sparks. Unplug battery charger before connecting or
disconnecting from the battery. Wear protective clothing
and use insulated tools.
• Do not modify machine or safety devices. Unauthorized
modifications may impair its function and safety.
• Check park brake function frequently. Adjust and service
Safety - 4

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido