Maintenance; Calibrating The Scale; Cleaning The Scale - Etekcity FIT 8S Manual De Usuario

Maintenance

Calibrating the Scale

If the scale has been moved or flipped upside down, it must be calibrated
to ensure accurate results.
1. Place the scale on a hard, flat surface.
2. Step on the scale with 1 foot until digits appear on the display
[Figure 2.1]. Then, step off.
3. The scale will show " " while calibrating, then "
complete [Figure
Figure 2.1

Cleaning the Scale

• Use a slightly damp cloth to clean the surface of the scale, followed
by a soft, dry cloth to wipe away any remaining moisture.
• use chemical or abrasive cleaning agents to clean the scale.
Do not
2.2].
18
" when
Figure 2.2