Attila PRF 960 Instrucciones De Uso página 139

OVEN BURNER REPLACEMENT OF
INJECTOR
– Lift and remove the lower panel inside
the oven.
– Unscrew and remove the burner
securing screw A (fig. 8.6).
– Slacken screw B (fig. 8.6).
– Withdraw the burner in the manner
shown in figure 8.7, and rest it inside
the oven. Take care not to damage the
wire to the ignition electrode and the
safety valve probe.
– Using a 10 mm box spanner, unscrew
the injector (indicated by the arrow in
fig. 8.7) and replace with a new
injector selected in accordance with
the " TABLE FOR THE CHOICE OF
THE INJECTORS "; then replace the
burner repeating the above steps in
reverse order.
Fig. 8.6
A
U
Fig. 8.7
B
139