Technical Data - ANSMANN ACPS2460 Instrucciones De Manejo

the notebook computer
• do not overload the power supply ( see technical details)
• to clean the power supply, disconnect it from the mains and
use only a dry cloth
OperatiOn
1. adjust the Output voltage switch (1) on the bottom side of
the power supply to the correct output voltage (15-24 v) using
the key (2). detailed information about the correct voltage
and polarity can be found inside the manual of the notebook
computer, or on the name plate of the original power supply.
please note that incorrect voltage setting or polarity can
damage your notebook computer. if you are unsure, do not
connect with your computer. consult your local dealer!
2. connect the correct plug (see table 3) to the connector of
power supply (4).
3. insert the output plug to the appliance (notebook computer)
4. connect the mains lead to the mains socket (100 – 240 v
ac). the power led should light.
5. turn on the notebook
6. after use, remove the power supply from the mains
tecHnical data
prim.:
sec.:
100 – 240 v ac / 50-60 Hz
15v / 16v / 18v / 19v / 20v dc - max. 6a
22v / 24 v dc - max. 5a