Descargar Imprimir esta página

Publicidad

Enlaces rápidos

WARNING
WARNING: Improper use or failure to follow instructions can result in
explosive failure causing serious eye or other injury. For safe use of this product
you must read and follow all instructions. Do not leave a pressurized sprayer in the
hot sun. Heat can cause pressure build-up resulting in possible explosion. Do not
store or leave solution in tank after use. Always wear goggles, gloves, long sleeve
shirt, long pants and full foot protection when spraying. Never use any tool to
remove pump if there is pressure in sprayer. Never stand with face or body over top
of tank when pumping or loosening pump to prevent ejecting pump assembly and/
or solution from striking and injuring you. Never pressurize sprayer by any means
other than the original pump. Do not attempt to modify this sprayer. Replace parts
only with manufacturer's original parts. Never spray flammable, caustic, acidic,
chlorine, bleach or other corrosive solutions or heat, pressure, or gas produc-
ing chemicals. Always read and follow chemical manufacturer's instructions
before use with this sprayer as some chemicals may be hazardous when used
with this sprayer.
Congratulations!
Congratulations!
You have just purchased a quality Chapin product.
You have just purchased a quality Chapin product.
Register Your Sprayer Online @ www.chapinmfg.com
Register Your Sprayer Online @ www.chapinmfg.com
Questions? Do Not Return To Store.
Questions? Do Not Return To Store.
Call us @ 1-800-950-4458 or www.chapinmfg.com
Call us @ 1-800-950-4458 or www.chapinmfg.com
¡Felicitaciones!
¡Felicitaciones!
Usted acaba de adquirir un producto de calidad Chapin.
Usted acaba de adquirir un producto de calidad Chapin.
Registre su pulverizador en línea en www.chapinmfg.com
Registre su pulverizador en línea en www.chapinmfg.com
¿Preguntas? No regrese a la tienda;
¿Preguntas? No regrese a la tienda;
llámenos al 1-800-950-4458 o visite www.chapinmfg.com
llámenos al 1-800-950-4458 o visite www.chapinmfg.com
Félicitations!
Félicitations!
Vous avez acheté un produit de qualité Chapin.
Vous avez acheté un produit de qualité Chapin.
Enregistrez dès que possible votre pulvérisateur en ligne à l'adresse suivante:
Enregistrez dès que possible votre pulvérisateur en ligne à l'adresse suivante:
www.chapinmfg.com
www.chapinmfg.com
Questions ? Ne retournez pas au magasin.
Questions ? Ne retournez pas au magasin.
Appelez-nous 1-800-950-4458 ou visitez le www.chapinmfg.com
Appelez-nous 1-800-950-4458 ou visitez le www.chapinmfg.com
# 16100
# 15410
# 16200
# 15420
1. Hose to Tank
1A
• Insert the outlet tube portion of the discharge assembly into the tank adapter
(Fig. 1A).
• Firmly insert the outlet tube portion into the tank adapter (Fig. 1B) leaving no gap
between the tank adapter and outlet tube adapter. Firmly tighten the retaining nut
to the tank adapter (Fig. 1C).
2. Extension Wand to Shut-off
2A
Sk-1154-1
2B
Retaining Nut
Loosen retaining nut from shut-off (2A). Insert extension wand into end of shut-off
until it stops. Tighten retaining nut (2C).
3. Pre-Use Check
1) Do: Check tightness of hose nut to be sure hose is securely attached to the tank
outlet.
2) Do: Inspect hose for deterioration, cracks, softness, or brittleness. If any of
these conditions are found, replace hose before using. Replace with original
manufacturer's parts only.
3) Do: Remove pump (see Filling, Pressurizing and Spraying Instructions), inspect
interior and exterior of tank for signs of deterioration of body and bottom. Any
sign of deterioration indicates possible tank weakening and could result in
explosive bursting under pressure. If any of these signs are found, discard tank
immediately and replace. Do not attempt to patch leaks, etc., as this could result
in serious injury.
4) Do: Follow Filling, Pressurizing and Spraying Instructions, except use water only
(Pump plunger 10-20 strokes and inspect for leaks).
5) Do: Direct shut-off away from you and open to make sure discharge is not
clogged.
6) Do: If unit passes this test, release pressure (see Pressure Releasing Instructions),
empty tank, and proceed with Filling, Pressurizing and Spraying Instructions.
7) Do: Inspect all metal parts including the wand, nozzle and fittings for rust,
corrosion and pitting. If any of these conditions are found, replace affected part
with original manufacturer's part before using.
4. Filling
1) Do: Turn pump handle counterclockwise and remove pump
2) Do: Prepare spray solution following all directions and safety warnings on
chemical label.
3) Do: Fill tank to no more than the proper gallon marker. Do NOT: overfill to
accommodate pump.
4) Do: Check pump to make sure that no grass or dirt is stuck to barrel. Replace
pump in tank and tighten securely.
014033 R0915
1B
1C
Retaining Nut -
No Gap
Securely tightened.
Adapter
Outlet
Tube
2C
Extension
Wand
5. Pressurizing and Spraying
5A
5B
OR
5B
5A
Do: Turn handle
Do: Pump until
clockwise to tighten. Push
you feel resistance.
handle down, turn 1/4
turn counterclockwise to
release.
5D
Do: Turn end of nozzle
to adjust spray pattern.
6. To Release Pressure
Sprayers with no pressure release valve
Do: With pump facing away, turn locked handle counterclockwise until air begins to
escape. Stop turning handle when you hear air escaping. Do: Point pump away until
all air has escaped.
7. Care, Storage and Maintenance
1) Do: Rinse tank thoroughly with water only, empty, refill with water. Follow Filling,
Pressurizing and Spraying Instructions, except pump unit only 8-10 strokes. Be sure
that the wand and nozzle are thoroughly rinsed with water after each use.
2) Do: Open shut-off and allow water to run through discharge assembly.
3) Do: Release pressure (Follow Pressure Release Instructions), remove pump and
empty sprayer.
4) Do: Store sprayer tank upside down, with pump removed, in a warm dry location.
5) Do: Periodically oil pump by dropping 10-12 drops of light oil down pump rod
through opening in cover.
8. Fatigue-Free Spraying
To Lock
8A
8B
For constant spraying, push down on shut-off handle and slide forward.
To Un-Lock
8D
8C
To release, press down and slide handle back.
5C
5C
Do: Push handle, down,
turn 1/4 turn clockwise to
lock. Begin spraying. Re-
pump sprayer as required
to maintain spray force.

Publicidad

loading

Resumen de contenidos para Chapin 16100

  • Página 1 Call us @ 1-800-950-4458 or www.chapinmfg.com Call us @ 1-800-950-4458 or www.chapinmfg.com ¡Felicitaciones! ¡Felicitaciones! Usted acaba de adquirir un producto de calidad Chapin. Usted acaba de adquirir un producto de calidad Chapin. Extension Registre su pulverizador en línea en www.chapinmfg.com Registre su pulverizador en línea en www.chapinmfg.com...
  • Página 2 7. Cuidado, Almacenamiento Y Mantenimiento 4. Remplir ADVERTENCIA 1) Sí: Enjuague minuciosamente el tanque sólo con agua, vacíe y vuelva a llenar con agua. Siga 1) Oui : Tournez la poignée de pompe dans le sens antihoraire et retirez la pompe. las Instrucciones de cómo llenar, presurizar y pulverizar, excepto para la unidad de la bomba ADVERTENCIA: El uso inapropiado o el no seguir las instrucciones puede resultar en una 2) Oui : Préparez la solution de pulvérisation en suivant toutes les instructions et les avertissements...

Este manual también es adecuado para:

154101620015420