Twin-Star International TC60-1066 Manual De Instrucciones página 4

Remove all the parts from carton,
separate them into part numbers
indicated on the list and make sure
quantities are correct.
1. TO ADJUST HINGES
To adjust door forward or backward change
keyhole slot position.
(As Shown In Diagram a)
To adjust door right or left loosen / tighten
screw. (As Shown In Diagram b)
To adjust door up or down adjust bracket height.
(As Shown In Diagram c).
2. There are levelers located on the bottom of the
Wood Feet, height can be increased by twisting
counter-clockwise.
3.
Choose desired height of Shelf (H) and place the
four Shelf Pins (O) into same height shelf holes
inside side panels. Screw the shelf pins securely
into the shelf holes of the side panel. Insert
Wood Shelf (H), allow shelf pins to fit firmly
inside the wood shelf grooves.
E-3
c
a
b
leveler
H
H
shelf pin
H
H
Wood
Shelf
O