Xr200 Panel De Control - DMP XR200 Guia De Instalacion

This equipment generates and uses radio frequency energy and, if not installed and used properly in strict accordance with
the manufacturer's instructions, may cause interference with radio and television reception. It has been type tested and
found to comply with the limits for a Class B computing device in accordance with the specification in Subpart J of Part 15
of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. If
this equipment does cause interference to radio or television reception, which can be determined by turning the equipment
off and on, the installer is encouraged to try to correct the interference by one or more of the following measures:
Reorient the receiving antenna
Relocate the computer with respect to the receiver
Move the computer away from the receiver
Plug the compute into a different outlet so that computer and receiver are on different branch circuits
If necessary, the installer should consult the dealer or an experienced radio/television technician for additional suggestions. The
installer may find the following booklet, prepared by the Federal Communications Commission, helpful:
This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402
Digital Monitoring Products
ii

XR200 PANEL DE CONTROL

(COMMAND PROCESSOR™)
GUÍA DE INSTALACIÓN
"How to identify and Resolve Radio-TV Interference Problems."
Stock No. 004-000-00345-4
© 1995 - 2003 Digital Monitoring Products, Inc.
Information furnished by DMP is believed to be accurate and reliable.
This information is subject to change without notice.
FCC NOTICE
XR200 Guía de Instalación