Switching On The Device - Clatronic DR 2890 Instrucciones De Servicio

5....-05-DR 2890
Attachment of the Individual Accessories
It is possible to attach the individual nozzles directly to the steam pistol of the hose
(3):
• Attach one of the nozzles to the steam pistol until it locks in place.
• In order to release the nozzle again, please press the button on the steam
pistol.
• Keep the button pressed down and then pull the nozzle off
or extend the nozzle attachments with one or two extension tubes (10).
• Please insert the two-parts of the extension tube into one another until they lock
into place and then attach them to the steam pistol (3).
• Then attach the floor brush nozzle (12) or the accessories.
• In order to release the extension tube, please press the button on the steam
pistol.
Note: The round brush attachment can only been used in conjunction with the jet
nozzle.
Jet nozzle with round
brush attachment (11):
Floor brush nozzle (12):
Window wiper (13):
Non-woven cover (14):
Before inserting the mains lead into the socket, check whether the voltage you
intend to use complies with that of the machine. For details see the machine label.
After you have filled the kettle with water and selected a cleaning attachment, plea-
se proceed as follows:
1. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
2. If you have not done so already, open the cover on the main device and attach
the connection head (17).
3. Press the on/off switch (1). The red control lamp lights
up. The temperature control lamp (18) shows that the
device is heating up.
4. After approx. 4-5 min the steam temperature has been
reached and the temperature control lamp (18) goes off.
5. Press the steam control button (19). The green control
lamp lights up.
24.06.2004 14:04 Uhr
For cleaning joints, the edges of bath tubs or areas
which are difficult to access etc.
For large surfaces, such as laminate or tiles etc.
For window cleaning, shower partitions etc.
Non-woven cover for sensitive surfaces.
Use the cover in conjunction with the floor brush nozz-
le.

Switching on the Device

Seite 51
51
GB