Proxxon BS/E Manual De Instrucciones página 7

2. First position new grinding belt around the
tensioning roller (1). Then press the
tensioning roller backwards and position the
belt over the drive roller (2).
Adjusting the grinding belt
The grinding belt must run in the vcentre of the
tensioning roller. If this is not the case, it must
be readjusted.
Danger!
Danger of injury!
1. Switch unit on
2. Select lowest speed
3. Turn adjusting screw 2 (Fig. 5) to left or right
until the belt runs in the centre of the
tensioning roller (1).
Adjusting the grinding head
1. Switch unit off
2. Press retaining knob 1 (Fig. 6) in and adjust
the grinding head (2) to the desired angle.
3. Release retaining knob. The grinding head
engages.
Connecting the vacuum cleaner
1. Connect parts of the connection adapter 1
(Fig. 7).
The adapter parts can be connected in such a
way that vacuum cleaner pipes of various
diameters may be connected.
2. Insert vacuum cleaner hose (2) into the
connection adapter (1).
Maintenance
Danger!
Danger of injury!
Disconnect from the mains prior to all
maintenance and cleaning operations.
Each unit becomes soiled in carrying out
operations on wood. Care is therefore
essential.
Note:
Note:
Always keep the apertures which are
necessary for cooling the motor
free of dust and dirt.
All grinding dust must be thoroughly removed
with a brush or a soft cloth.
Make certain that no ventilation slots are
obstructed.
Disposal
Please do not dispose of the device in
domestic waste! The device contains valuable
substances that can be recycled. If you have
any questions about this, please contact your
local waste management enterprise or other
corresponding municipal facilities.
EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
In sole responsibility, we declare that this
product conforms to the following directives
and normative documents:
EU EMC Directive
2004/108/EC
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 07.2012
EU Machinery Directive
2006/42/EC
DIN EN 60745-1 / 01.2010
DIN EN 60745-2-4 / 11.2012
Date: 04.02.2013
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical
with the signatory.
BS/E
28536
- 7 -