Radio Functions; Tuning In A Radio Station; Station Seek; Setting A Station Preset - Boston Horizon Trio Manual Del Propietário

Radio Functions

Tuning In a Radio Station

using the front panel controls
Turn the control to highlight the AM, FM1
1
MODe
or FM2 source. Press the control to select the
source.
Turn the control until the station frequency
2
tune
you want shows in the display.
using the remote control
Press the or radio source button.
1
aM fM
]
[
Press the or button once to step up or
2
down the radio band to the next station frequency.
note: If the station you select is assigned to a station preset, the preset indicator and number are displayed.

Station Seek

using the front panel controls
Press the control. The Trio will seek up the radio
tune
band for the next receivable station. Or press the
}
or button. The Trio will seek up or down the radio
band for the next receivable station.
using the remote control
[ ]
Press and hold the or button. The Trio will seek
up or down the radio band for the next receivable
station.

Setting a Station Preset

Use the control or press the remote
1
MODe
control or button to select the radio band
aM fM
you want. There are two sets of FM presets –
FM 1 and FM 2.
Use the front panel control, or the remote
2
tune
[ ]
control and buttons to tune in the station
you want to assign to a preset.
Press and hold the front panel or remote control
3
(1-5) you want to set up. A tone
preset ButtOn
will sound and the preset number will light
indicating the station has been assigned to the
preset.
In this example FM station 107.9 has been assigned to preset 5 in the FM 2 group.

Selecting a Preset Station

Use the control, or press the remote
1
MODe
control or button to select the radio
aM fM
band you want to use. There are two sets of FM
presets – FM 1 and FM 2.
Press and quickly release the
2
(1-5) you want to select. The preset indicator,
number and the station frequency will light.
In this example AM preset 5, with station frequency 1050
assigned to it, has been selected.
note: Pressing a
more than once
preset ButtOn
will switch to the other radio band or preset group.
Using this example, if you press
preset 5 in the FM 2 group. Press the button one more time and AM preset 5 is selected again.
{
preset ButtOn
again, then preset 5 in the FM 1 group is selected. Another press selects
preset ButtOn 5
E
N
G
L
I
S
H
7