ENERGY SISTEM ENERGY F3510 Manual De Usuario página 36

IMAGE DISPLAY – SINGLE SHOW
≥
This is the default mode of visualization. On single show the image is still.
You can go to the next/previous image pressing DOWN/UP respectively.
Important: Do not leave the same image still for more than one day
because you risk damaging the TFT screen. We recommend changing the
image at least once or twice a day, or even better use slide show with a
high elapse time.
Press ENTER to do a zoom on the current image. The zoom level is
displayed on the top left corner of the screen. Using the MODE/DOWN/
UP/ESC buttons you can move the amplified image to the left/up/down/
right respectively. To exit the zoom mode, press ENTER three more times
to return to single show.
36