Manual Mode - Aqua Medic DC Runner x.3 Serie Manual De Instrucciones

Fig. 5: The tick must be set after the device's name before tapping on "NEXT".
Now, select the device in the APP that you want to add, tap on the device's name (a tick appears after the
device's name) and then tap on "NEXT".
AP network: Not available at the moment.
4. Pump control
Fig. 6: Page „My Devices"
In the APP, on the page "My Devices", tap the device's symbol of the desired pump for two seconds to call up
the device control. If you only briefly tap the symbol, the respective device is switched on (blue symbol) or off
(grey symbol). After successfully adding the pump, press and hold the pump icon for two seconds to enter the
pump control page.

4.1. Manual mode

Fig. 7: Pump control
10