Aqua Medic EcoDrift x.3 Serie Manual De Instrucciones página 15

In the device control, press the lower symbol "MANUAL" for two seconds to call up the setting for manual mode.
The manual pump control is used to operate the respective pump independently of other pumps and
without time control.
Fig. 8: Manual settings mode
Here, you switch the pump mode by tapping the "<" and ">" buttons at the bottom of the page. The symbol
between the arrow keys and the colour of the ring above it changes. Click the pump mode icon in the middle
circle to set the specific flow rate and waveform frequency.
Fig. 9: Classic Mode
Classic Mode：Press or drag the bar to adjust the flow and frequency. The minimum flow is 30%. The minimum
frequency is 5%. Pulse or circulation can be chosen. The "cross-flow" function in manual mode means
that the respective pump is controlled at intervals. There is no alternating operation of several
pumps.
Fig. 10: The pump output is varied under "Flow", the switch-on and switch-off time is adjusted with "Frequency"
(minimum approx. 30 seconds, maximum approx. 90 minutes).
15