Devicenet Connections - Mettler Toledo IND780 Guia De Instalacion

2.8.4.

DeviceNet Connections

The DeviceNet option board (Figure 2-96) is connected to the network by a DeviceNet-specific
twisted pair cable.
Figure 2-97 indicates the pin numbering of the DeviceNet Option Board connector., Wire colors and
functions are detailed in Figure 2-98.
Consult
2-62
METTLER TOLEDO IND780 Installation Guide
Figure 2-96: DeviceNet Option Board
1 2 3 4 5
Figure 2-97: DeviceNet Option Board Connector Pin Numbering
Figure 2-98: DeviceNet Connector Wiring
http://www.odva.org/ for additional DeviceNet wiring information.
NOTES:
1. CONNECTION WITH 2 TWISTED PAIR SHIELDED CABLE
BELDEN 3082A OR 2083A OR EQUIVALENT.
2. REFER TO O.D.V.A. DEVICENET DOCUMENTATION FOR
OTHER CONSIDERATIONS.
3. WIRE SIZE: 14 AWG (2.088 mm2) MAXIMUM
22 AWG (0.322 mm2) MINIMUM.
64057253 | 14 | 08/2014