Accessories; Communication; Interface Commands - Fisherbrand Precision Serie Manual De Instrucciones

Fisherbrand TM Precision & Analytical Series
9.3

Accessories

DESCRIPTION
Auxiliary Display PAD7
Security Device
RS232 Cable 25 pin
RS232 Cable 9 pin
Dust Cover
In-use Cover
Printer SF40A
Power Adapter for Balance
9.4

Communication

9.4.1 Interface Commands

Commands listed in the following table will be acknowledged by the balance.
Command Function
IP Immediate Print of displayed weight (stable or unstable).
P Print displayed weight (stable or unstable).
CP Continuous Print.
SP Print on Stability.
SLP Set Auto Print to On Stability, allow non-zero displayed weight be printed.
SLZP Set Auto Print to On Stability, allow both stable non-zero weight and stable zero reading to be
printed.
xP Set Auto Print to Interval Print, x = print interval (1-3600 sec), 0P disable the interval Print
0P 0P disable interval print, continuous print or print on stability
H Enter Print Header Lines, the format is: H x "header string".
Where x = line number 1 to 3, "header string" can be up to 24 alphanumeric characters.
If no string in the command, "H x" will read the stored header x.
Z Same as pressing Zero Key
T Same as pressing Tare Key.
xT Establish a preset Tare value in displayed unit. x = preset tare value. Sending 0T clears tare (if
allowed).
PT Prints Tare weight stored in memory.
PM Print current application mode (weighing mode).
xM Set current application mode to x. x depends on applications
1 – Weigh
2 – Count
3 – Percent
M Scroll to the next enabled mode.
PU Print Current weighing unit: g, kg, lb, oz, etc....
xU Set balance to unit x: g, kg etc.
1 – g
2 – kg
3 – mg
4 – ct
PART NUMBER
80251396
80850043
80500524
80500525
30093334
30372547
30064202 (EU); 30064203 (AM)
46001724
37