Components And Features - Zavor ZCWDU01 Manual De Usuario

Components and Features

1. Pressure Cooker Pot: Made of
high-quality, heavy-gauge, 18/10
stainless steel. All cooking takes
place in the pressure cooker pot.
2. Lid: Made of high-quality, heavy-
gauge stainless steel. The lid must be
properly locked in position in order to
build sufficient pressure for cooking.
The raised indentation on top of the
lid, located to the left of the handle,
allows you to easily align the lid to
the cutout on top of the base handle
when closing the pressure cooker
(Fig. 2)
WARNING: NEVER
PRESSURE COOKER OPEN
3. Pot Handle: Besides being used to
move and carry the pressure cooker,
the pot handle interlocks with the
lid handle when the lid is turned
clockwise. ( Fig. 2)
4. Lid Handle: Used to remove the
lid from the pressure cooker, the
lid handle
components vital to the use of the
pressure cooker.
To reduce the risk of burns or spills,
the lid and pot handle should be
positioned so that it is turned inward
towards the back of the stove, and
does not extend over adjacent surface
units or overhang over the edge of the
stove top.
5. Support Grip Handle: The support
grip handle provides greater stability
when moving or carrying the pressure
cooker.
6. Operating Valve: This operating
6
FORCE THE
2
contains important
valve features 2 pressure settings
(LOW and HIGH), a steam release
position (RELEASE), and a CLEAN
position. (Figures 3-4-5-6). Note that
the operating valve will not simply turn
to the CLEAN position. See the Care
and Cleaning section of this manual for
instructions on how to turn the valve to
the CLEAN position to remove it.
Pounds of
Selector's Pressure per
Position Square Inch
(psi)
CLEAN 0
RELEASE 0
LOW 8
15
HIGH
3
4
5
6
Pressure level
Clean position
-no pressure
Steam release
position
-no pressure
Low
High