Cleaning Mode Selection - Tineco PURE ONE 812 SERIE Manual De Uso

Cleaning Mode Selection

AUTO Mode
• In AUTO mode, the power indicator and the color of dust monitoring loop change according to the
amount of dust detected. A red dust monitoring loop indicates more dust is detected whereas a
blue loop indicates less is detected. This mode automatically provides the best cleaning solution.
• Keep sharp objects away from the digital display to avoid scratches and scrapes.
To enter AUTO mode:
The default setting on startup is AUTO.
The appliance then takes 3 seconds to
initially detect blockages or dust. If no dust
is detected, power is reduced to conserve
energy.
When in Manual mode, press AUTO
for 2 seconds until the AUTO indicator
illuminates.
12
Clean: On Min
Power
Vary depending
on dust amount
Heavy dirt: On
Max Power