Operation and LEDs
Home Key
1
Menu
2
Navigation
Keys
Ethernet
3
Link 9 Activity
LEDs
RS-232 Link 7
4
Activity LEDs
1. Home Key: Returns the user to the Home Screen.
2. Menu Navigation Keys: Used to navigate the various
menus and screens for the processor.
3. Ethernet Link 9 Activity LEDs: The orange LED will
illuminate when there are any Ethernet signals being
transmitted or received on Link 9. The green LED will
illuminate when the ethernet port is connected to a hub/
switch/router or a PC.
4. RS-232 Link 7 Activity LEDs: The LEDs will illuminate
when there are any RS-232 signals being transmitted
(TX LED) or received (RX LED) on Link 7.
5. RS-232 Link 3 Activity LEDs: The LEDs will illuminate
when there are any RS-232 signals being transmitted
(TX LED) or received (RX LED) on Link 3.
6. Inter-Processor Link Activity LEDs: The LEDs will
illuminate when there are any processor communication
signals being transmitted (TX LED) or received (RX LED) on
Link 2.
6
OK
5
7
RS-232 Link 3
Contact
Activity LEDs
Closure Input
Status LEDs
6
Inter-Processor
Hybrid Repeater
Link 2 Activity
Link 8 Activity
LEDs
LEDs
7. Contact Closure Input Status LEDs: The LEDs will
each illuminate when a contact closure is closed on the
corresponding input.
8. Hybrid Repeater Link 8 Activity LEDs: The LEDs will
illuminate when there are any wired signals being
transmitted (TX LED) or received (RX LED) on Link 8.
9. RF Link Activity LEDs: The LEDs will illuminate when
there are any RF signals being transmitted (TX LED) or
received (RX LED) on that link.
10. Power In LED: This LED illuminates when power from the
adapter is present at the Power Input Jack.
11. LCD Display: Displays programming and diagnostic
information. The LCD Display will shut off after 45 minutes
of inactivity. To restore the display, simply press any key.
12. Display Power LED: This LED will illuminate when the
LCD Display has power.
12
11
10
9
RF Activity
LEDs
8
Display Power
LED
LCD Display
Power In
LED