Troubleshooting; Technical Data - NUK Expressive Instrucciones De Operación

CARE:
• Disassemble before cleaning. Prior to first use, sanitize by boiling in water for 5 minutes.
• For day to day cleaning, wash using plenty of hot water and liquid dishwashing soap, then rinse with hot
water for 10 to 15 seconds. Dishwasher-safe (top rack). Allow to dry before storage.
• To heat, use a NUK
heated water.
• For hygiene and safety, replace with appropriate NUK
1. Place the supplied nipple (10) and collar (9) onto the breast milk container. The NUK
can be used with all NUK
2. The NUK ® Air System vents the bottle, preventing vacuum buildup and allows baby to drink continuously,
swallowing liquid instead of air. Make sure the NUK
baby's nose for the best results.
Problem
Pump has no suction
or too little suction
Temperature range
-Operation
-Storage
03_62773_5111_B_REL_3-28-13.indd 9
Bottle Warmer or place the bottle under hot running water or in a container of
®
Wide-Neck Nipples.
®

9. Troubleshooting

Reason
Pump unit is not fitted
correctly
Improper seal around the
breast

10. Technical Data

42°F to 104°F
32°F to 104°F
www.NUK-USA.com
Nipples after about 2 months of use.
®
Air System symbol on the nipple (10) is lined up under
®
Disassemble the pump unit and be sure all parts
are firmly attached.
Ensure that the breast shield is pushed snugly
against the breast so that nipple is inserted in the
funnel and seal around the breast is airtight.
1-888-NUK-1238
9
Breast Milk Container
®
Solution
9/16/2013 10:01:11 AM