Declaration Of Conformity; Technical Specifications - stayer SC210BW Manual De Instrucciones

18.Use extensible cables for outside use. When using
the tool at an outside location, only use extensible cables
for outside use that are marked for this purpose.
19. Be alert. Look at what you are doing, use common
sense and do not work with the machine when you are
tired.
20.Check damaged parts. Before using a tool again,
it should be carefully checked so as to determine that it
will operate suitably and be apt for the operation which
has been assigned to it. Examine alignment, fixing
and tightening of mobile and fixed parts, breakage of
parts, mounting, and other conditions that may affect
its operation. A damaged guard or other part should be
suitably repaired or replaced by an authorized technical
service unless anything else is stated in the instructions
manual. Have faulty switches replaced by an authorized
technical service. Do not use the tool if the switch does not
switch on or switch off.
21.Warning: The use of any accessories or supplements
other than one recommended in this instructions manual
may generate personal damages.
22.Have the tool repaired by qualified personnel.
This electrical tool complies with the appropriate safety
requirements. Repairs should be carried out by qualified
personnel only using original spareparts; otherwise, a
considerable risk could be generated for the user.

23.Technical specifications

Measure to be kept by saw blades (En847):
Diameter of the saw blade: 254 mm, Thickness of the
base disk: 1.8 – 2.8 mm, Hole diameter: 30 mm
Information on noise and vibration
The typical noise pressure level of the apparatus as
determined with an A-filter is: see table.
Wear ear protection!
The typical vibration transmitted to the hand / arm is
lower than 2.5 m/s2.
24.Warrantee
Warrantee card
You will find the warrantee card among the documents
belonging to the tool. You must fill in the warrantee card
completely and attach a copy of the purchase ticket or
invoice thereto, and give it to your distributor against the
corresponding acknowledgement of receipt.
Observation! Should this card be lacking, immediately
request your distributor to furnish it.
Terms of warrantee
As professional equipment, the warrantee period is set to
one year as from the date of purchase.
The warrantee will immediately cease to exist when the
client's service of the central offices does not have the
warrantee card within a one-month term as of the date of
purchase.
ENGLISH
32
The warrantee will equally cease to exist when the
machine has been used in an inappropriate manner or
making use of accessories being unsuitable for the uses
as foreseen by the manufacturer.
The warrantee is limited solely to manufacturing or
mechanization failures, and it ceases to exist when parts
thereof have been disassembled, manipulated or repaired
out of the manufacturing plant.
STAYER obliges itself to repair or replace the product or
the parts thereof that may be faulty, free of charge only after
a check and at the exclusive criterion of its technicians.
It is considered that all costs for transportation and
disassembling will be borne by the purchaser. So as to
facilitate the technicians' work, please attach a description
of the failures that the client has noticed at the tool during
the use thereof.

25. Declaration of Conformity

The undersigned: STAYER IBERICA, S.A.
Con dirección:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
TECHNICAL DATA
Are in conformity with the provisions of Directive 2006/42/
EC, 2014/30/EU:
As well as with the following regulations: EN 60745-1, EN
61029-1, EN 61029-2-11, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3
It has received a Type Certificate with the number
43/3M/02/000024 Issued by the notified body: 0056 ECA,
ENTIDAD COLABORADORA DE LA ADMINISTRACIÓN
S.A.U. Av. Roma, 21 / 43005 TARRAGONA
Signed: Ramiro de la Fuente
Director General
January 2021
32