1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the
device after its lifecycle could harm the environment. Do not dispose of
the unit (or batteries) as unsorted municipal waste; it should be taken
to a specialized company for recycling. This device should be returned
to your distributor or to a local recycling service. Respect the local
environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, do not
install or use it and contact your dealer.
2.
Safety Instructions
Keep this device away from children and unauthorized users.
There are no user-serviceable parts inside the device. Refer to an
authorized dealer for service and/or spare parts.
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this
manual.
Keep this device away from dust and extreme temperatures.
Protect this device from shocks and abuse. Avoid brute force when operating
the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for any
ensuing defects or problems.
Keep this manual for future reference.
Do not leave the thermometer inside an operational microwave or
traditional oven.
Not suitable for measuring the temperature of food and/or drinks.
4.
Operation
Refer to the illustrations on page 2 of this manual.
1.
Use button [B] to switch the thermometer on or off. Refer to §6 for battery
instructions.
2.
Slide the probe out of the protective sleeve. Insert the tip of the probe at
least 1cm in the measured substance for accurate measurement. Note that
V. 04 – 12/03/2018
DTP1N
USER MANUAL
3
©Velleman nv