Stihl MF-MM Manual De Instrucciones página 6

Ocultar thumbs Ver también para MF-MM:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

!
Warning!
Dethatcher and engine
noise may damage your
hearing. Wear sound
barriers (ear plugs or ear
mufflers) to protect your
hearing. Continual and
regular users should have their hearing
checked regularly.
Protect your hands with
gloves when handling the
power tool and the
attachment. Heavy-duty,
nonslip gloves improve
your grip and protect your
hands.
Clothing must be sturdy
and snug-fitting, but allow
complete freedom of
movement.
Avoid loose-fitting jackets,
scarves, neckties, jewelry,
flared or cuffed pants,
unconfined long hair or
anything that could
become caught on
branches, brush or moving parts of the
unit.
MF-MM
Wear long pants made of heavy material
to protect your legs. Do not wear shorts,
pants, sandals or go bare foot. Secure
hair so it is above shoulder level.
Good footing is most
important in dethatcher
work. Wear sturdy boots
with nonslip soles. Steel-
toed safety boots are
recommended.
Wear an approved safety
hard hat to reduce the risk
of injury to your head
when there is a danger of
head injuries.
THE MF-MM DETHATCHER
MULTITOOL
For illustrations and definitions of the
dethatcher MultiTool parts see the
chapter on "Main Parts".
!
Warning!
Never modify a MultiTool in any way.
Only attachments supplied by STIHL or
expressly approved by STIHL for use
with the specific STIHL power tool
models are authorized. Although certain
unauthorized attachments may be
useable on the STIHL power tool, their
use may, in fact, be extremely
dangerous.
English / USA
THE USE OF THE DETHATCHER
Transporting the Dethatcher
!
Warning!
Always turn off the engine and make
sure the attachment has stopped before
putting a dethatcher down. When
transporting your dethatcher in a
vehicle, properly secure it to prevent
turnover, fuel spillage and damage to the
dethatcher.
Prepartions before Using the Power
Tool
Before starting work, swing the
handlebar into the normal working
position and tighten it down with the
rotary knob. See chapter on "Adjusting
Handlebar" in the MultiEngine
instruction manual.
Always check your dethatcher for proper
condition and operation before starting,
particularly the throttle trigger, throttle
trigger interlock (and if applicable stop
switch), attachment and deflector.
The throttle trigger must move freely and
always spring back in the idle position.
The attachment must be properly
tightened and in safe operating
condition. Inspect for loose parts (nuts,
screws, etc.) and for cracked, bent,
warped or damaged parts.
5

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido