1
3
Correct Position of Gearbox:
(using the dethatcher)
The gearbox output shaft (1) must be
below the drive tube (2) – the arrow (3)
shows the correct direction of rotation of
the MultiTool.
See chapter on "Mounting the
MultiTool".
MF-MM
Check the Deflector
2
!
Warning!
To reduce the risk of injury from thrown
objects, operate the MF-MM dethatcher
only with the deflector shown above in
combination with properly mounted
deflector extensions and mud flap.
English / USA
Starting the engine
Details on starting the engine can be
found in the appropriate chapter of the
owner's manual for the MultiEngine.
Place the unit on firm ground in an open
area. The attachments must be clear of
the ground and all other obstructions.
!
Warning!
When starting, make sure you have a
firm footing - as shown; always stand to
one side of the machine to avoid risk of
injury from contact with rotating tool.
7