adapted to moist vacuum packed
goods.
If you want to vacuum pack things
that are crumbly, press the „Mode"
button to change from the „Normal"
function to the „Gentle" function.
Thus the vacuum packed goods
will be vacuum packed in a gentle
process.
7.
As soon as an optimal vacuum
packing result has been achieved,
the bag will be sealed. Likewise,
the indicator light of the „Seal"
button shows this accordingly.
8.
The appliance starts with the seal-
ing process, the vacuum pump is
no longer working.
9.
When the process is concluded,
both indicator lights go out.
10. If you want to interrupt the pro-
cess, press the „Stop" button.
11. Then press the two „Release"
buttons simultaneously. The lock-
ing mechanism is released and
you can remove the finished bag.
VACUUM PACKING WITH FILM
1.
Prepare
the
described in the section „Prepar-
ing the appliance for operation".
2.
Ensure that sure that the seal in
the appliance is clean. If foreign
objects, such as crumbs are on
the seal, they must be removed,
otherwise a vacuum cannot be
generated.
appliance
as
Copyright UNOLD AG | www.unold.de
12. The vacuum packing process is
completed and the food in the
bag is vacuum packed.
13. If you only want to seal the bag,
but not vacuum pack, insert
the bag into the appliance as
described above. Then press the
„Seal" button. As soon as the
indicator light of this button goes
out, the bag is sealed and can be
removed as described.
14. Always check whether the vac-
uum packing result meets your
expectations and ensure that the
sealing seam is complete and
faultless.
The sealing gasket in the
vacuum
becomes hot during operation
of the appliance. Consequently do
not touch the sealing gasket during
operation – danger of burn injury.
3.
Cut off the required amount of
film from the roll. Caution: Add
at least 7.5 cm for vacuum pack-
ing. If you want to reuse this bag,
you must add even more: Allow
2.5 cm for each vacuum packing
process.
4.
Insert an open end of the film into
the middle of the vacuum packing
packing
chamber
33