Muskoka MH35ABB Guía De Uso Y Cuidado página 9

Installation - Table Top (continued)
SECURING THE MOUNTING BRACKET
Use a screwdriver to secure the mounting bracket (C) to
C
AA
the table top stand with 4 small screws (AA).
AA
SECURING THE ELECTRIC FIREBOX
Using a screwdriver, secure the electric firebox
(A) to the top of the mounting bracket (C) with 2
small screws (AA).
C
A
INSERTING THE EMBER BED
Arrange the ember beds (acrylic crystals [D],
pebbles [E] or log set [F] ) along the inset window
D, E, or F
ledge at the front of the electric firebox (A).
A
INSTALLING THE FRAME
NOTE: This front is heavy. It is recommended that you use
two people at this stage to prevent damage to the front or
the electric firebox.
B
Lift the frame (B) into place, making sure the 2 tabs on the
top back of the frame (B) fit securely into the holes on the
top of the electric firebox (A).
Secure the frame (B) by fastening two small screws (AA) on
AA
both sides.
A
9