DataTransferViaUserProfile - HMM Diagnostics ANT+ smartLAB Operación Manual

When the scale has been successully paired with a receiving device, the
measured data will automatically be sent to the corresponding device such
as Smartphone or PC via ANT+ or Bluetooth Smart. The smartLAB
Body Analyser Scale will automatically select the correct data transfer
technology.
WhenusingtheHMMApps(suchasfitmefitmoveApporhLineApp)or
Gateways,theprofileandfunctionsettingscanbeautomaticallytransmit-
tered to the scale. This happens during a data transfer or after a battery
change/insertingthebatteries.Pleasefindmoreinformationinthechap-
ter „Setting up the user data".
Please find more information on the connection possibilities and other
features of the scale under www.support.hmm.info.
Note: HMMAppsarethefitmefitmoveAppandhLineApp,bothavailable
for Android and iOS.
What is ANT?
ANT is a wireless data transfer standard. In order to use it, both
transmission- and receiving device must be equipped with an ANT module.
What is BLE?
BLE is a wireless data transfer standard and is part of Bluetooth® Smart. In
order to use it, both transmission- and receiving device must be equipped
with an BLE module.
Data transfer via user profile
Setupyouruserprofileaccordingtotheinstructionsinthe"Measuring"
chapter of this manual. Your smartLAB
to transfer the data automatically. Please choose your user profile as it
is described in the chapter "Measuring" and start the measurement. Your
smartLAB
fit W Body Analyser Scale will transfer the measured data to the
®
receiving device automatically after the measurement.
It is important that the correct user is used when transferring
data. If the scale has not been used before, select your user
36
® fit W Body Analyser Scale is preset
fit W
®