A29 Connections - Arcam FMJ A29 Manual De Instrucciones

A29
connections
Power inlet
Connect the correct
mains cable here.
SWITCH POSITIONS
115 = 110 - 120V~
230 = 220 - 240V~
POWER INLET
ACCESSORY
SUPPLY
VOLTAGE
OUTPUT: 6V
110-120V/220-240V ~ 50-60 Hz
350W MAX
Voltage select
Ensure that the voltage selected
matches your local power supply.
Accessory Power
3.5mm mono jack socket for
accessory power cable (supplied).
The cable provides two 2.1mm DC
jacks to power rLink and/or rBlink
accessories.
Phono earth terminal
USB
For connecting your turntable
USB type A
earth lead, if required.
socket may be
used to power 5v
Note that this terminal must
accessories (0.1A
not be used as a safety earth.
max) and for
software updates.
AV PVR BD SAT TUNER CD
POWER
0.5A USB 5V / 0.1A
Audio inputs
The labels above the connectors give
suggested audio inputs, although any
suitable device may be connected to the
line-level inputs. (Note, however, that the
name of the input shown on the front-
panel display cannot be changed.)
and are all line-
AV, PVR, BD, SAT, TUNER CD
level inputs.
The input has different
PHONO (MM)
characteristics. See page 9 for more
information and page 8 for the phono
input specification.
Speaker terminals
See page 10 for information
on connecting loudspeakers.
PHONO RECORD PRE
(MM) OUT OUT
4–16 OHMS. CLASS 2 WIRING
Pre-amplifier output
provides the pre-amp output for
PRE OUT
use in a bi-amplified system (for example,
with a P49 power amplifier).
See page 10 for more information.
Record output
is a line level output for use in
RECORD OUT
recording from other sources.
See page 9 for more information.
E-7
Aux input
Analogue 3.5mm stereo jack socket,
intended for connecting a portable
MP3 player.
POWER / STANDBY
AUX PHONES POWER
Phones
3.5mm stereo jack socket,
intended for use with a set of
headphones.
See page 9 for more
information.
Note
Please read the 'Placing the unit' , 'Power' and
'Interconnect cables' sections on page 6 before
connecting up your A29 integrated amplifier!