Installation Safety - Samsung NA305310F Serie Manual De Instalación

Important safety information

Installation safety

WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the
following precautions.
• Have your cooktop installed and properly grounded by a qualified installer, in
accordance with the installation instructions. Any adjustment and service should
be performed only by qualified gas cooktop installers or service technicians.
• Do not attempt to service, modify, or replace your cooktop or any part of your
cooktop unless it is specifically recommended in this manual. All other service
should be referred to a qualified technician.
• Always use new flexible connectors when installing a gas appliance. Do not use
old flexible connectors.
• Make sure the hold down brackets are properly installed on the cooktop. See the
installation instructions for more information.
• Remove all tape and packaging materials.
• Remove all accessories from the cooktop. Grates and griddles are heavy. Use
caution when handling them.
• Make sure no parts came loose during shipping.
6 English
Install_NA30R5310FG_AA_DG68-01133A-00_EN.indd 6
• Make sure your cooktop is correctly installed and adjusted by a qualified
service technician or installer for the type of gas (natural or LP) you will use. For
your cooktop to utilize LP gas, the installer must replace the 5 cooktop burner
orifices with the provided LP orifice set, and reverse the GPR adapter. These
adjustments must be made by a qualified service technician in accordance with
the manufacturer's instructions and all codes and requirements of the authority
having jurisdiction. The qualified agency performing this work assumes the gas
conversion responsibility.
• Installation of this cooktop must conform with local codes or, in the absence
of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest
edition. In Canada, the Natural Gas and Propane Installation Code, CSA B149.1.
This cooktop has been design-certified by ETL according to ANSI Z21.1, latest
edition, and Canadian Gas Association according to CAN/CGA-1.1, latest edition.
4/10/2019 2:36:03 PM