Signal Source "Pc; Setup Menu For Signal Source "Pc; Menu "Pc; Supported Graphics Modes - Silvercrest LT 1510 Manual Del Usuario E Información De Servicio

Signal Source "PC"

Setup Menu for Signal Source "PC"

The setup menu lets you perform specific settings to customise the LT 1510 according to techni-
cal and personal requirements. Press the MENU button (50) to open the setup menu. The menu
is divided into four items allowing you to adjust or change picture, sound, system preferences and
picture geometry settings.
 The options available under "Picture" are the same as for the signal source "DTV", only the
Colour, Sharpness and Tone options are not available here. Please read the description on
page 21.
 The options available under "Sound" are the same as for the signal source "DTV". Please read
the description on page 22.
 The options available under "Function" are the same as for the signal source "DTV", only the
Video Size and TT Language options are not available here. Please read the description on
page 23.

Menu "PC"

H Position
V Position
Phase
Clock
Auto Sync

Supported Graphics Modes

The following list contains the PC graphics modes that are supported by your LT 1510. Never set
any other resolution and vertical frequency other than those specified.
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 1024
1360 x 768
This option lets you move the picture position horizontally.
This option lets you move the picture position vertically.
This option lets you adjust the phase in order to optimise the picture quality.
This option lets you adjust the pixel clock in order to optimise the picture
sharpness.
Automatically adjusts the settings for the horizontal and vertical position, the
horizontal size as well as the phase and pixel clock.
Vertical frequency (Hz)
60.00 Hz
60.00 Hz
60.00 Hz
60.00 Hz
60.00 Hz
Signal Source "PC"
39