Interacoustics EyeSeeCam vHIT Manual De Instrucciones página 27

EyeSeeCam vHIT Instructions for Use – EN Page 20
Figure 4-7 Sequence of calibration fixations displayed in the Eye in Space plot at the bottom right of the calibration screen. The
sequence is: center, right, left, upper, lower. This sequence is repeated twice within a duration of 24 seconds.
In this screen you can see the raw eye movements of the patient as they follow the 5 calibration dots.
Figure 4-8 Calibration screen with raw position data of eye fixations on the calibration targets. The fixations are aligned like a
cross and they are diplayed in the Eye in Image plot.
The calibration procedure wil automatically stop when after about 24 seconds. If you wish to abort the calibration before then,
then select Stop.