Utilities; Flooding Washing; Recycling Washing; Internal Cleaning - Spin COUNTRY CLIMA Manual De Uso

To make the pressure test follow the procedures described in the "pressure test".
NB: Before the charging phase, if the quantity of gas inside the bottle is less than 1Kg, the display will visualize the
message "insufficient gas".
NB: The message does not appear before the charging!
NOTE: Additive Function not present.
9.7.

Utilities

The menu "Utilities" includes the following functions:


FLOODING WASHING*



RECYCLING WASHING*



INTERNAL CLEANING



NITROGEN TEST*


PRINTING (Printer version)

PRINT TOTAL (Printer version)
*NB. The marked functions can be used only with the special accessories available on request.
Contact your dealer to receive further information about prices and availability of the kits.
9.7.1 Flooding Washing
Attention: To make the flooding washing of the a/c installation it is necessary to ask your dealer for the specific kit
01.000.96.
With the flushing kit by Spin it is possible to wash a/c installations without dismounting any parts from the
installation or with the dismounted compressor.
At the end of the washing it is possible to print the performed operation.
NB: The instructions are included in the kit.
9.7.2 Recycling washing
This function is not available in the version Country CLIMA
9.7.3 Internal cleaning
The station can make a self-cleaning of the internal circuit. This function is ideal also for the treatment of the gas
contained in the internal bottle.
To make the internal cleaning, close the LP and HP taps, press "enter" after selecting "Internal Cleaning" from the
menu Utilities.
The cleaning will stop automatically after 90 seconds.
9.7.4 Nitrogen Test
The nitrogen test allows checking the sealing of the a/c installation under pressure.
To make the test it is necessary to ask your dealer for the specific kit.
NB: The instructions are included in the kit.
14/04/2016 Vers. 2 41