Maintenance; Cleaning The Filter; Fault Finding; Resolving Problems - NEW POL eXperience XS 251 CO Manual De Instrucciones

GB
In order to guarantee optimum drying results under all circumstances, remember that the filter must be
cleaned regularly. Remember to check and clean the filter after each drying cycle.
Important:
The filter must only be cleaned when the appliance is cold! Clean the filter following the procedure described below:
Open the door.
Grasp the filter in both hands
and push it upwards to remove
it.
Carefully widen the top edge
and open the filter.
Remove the woollen particles.
Close the filter, making sure
All electric appliance may breakdown at some time. Remember to call a qualified electrician in these cases. However,
many problems can be resolved without the need for external intervention.
Important: If a fault occurs, disconnect the appliance from the mains supply immediately.
Before calling the customer service centre, check the points listed below.
If the drier doesn't start
• Check that:
1) The appliance is plugged
into the mains supply.
2) The mains socket is work-
ing correctly:
2a) The fuse has not
blown. (Check by plug-
ging in another appli-
ance such as a table
lamp).
2b) All the instructions in
the manual have been
The retailer can provide an accessory to enable the drier to be mounted on top of a front-loading washing machine,
thus saving space. The installer will inform you of the appliance model for which this option is possible.
18

MAINTENANCE

CLEANING THE FILTER

that the catch closes at the
correct position.
Clean the filter slide guides on
the appliance, using a vacuum
cleaner if necessary.
Reposition the filter in the slide
guides (fig. 13).

FAULT FINDING

RESOLVING PROBLEMS

followed.
If the drier doesn't start
• Check that:
1) The door is closed properly.
The washing does not dry
• Check that:
1) The air exhaust tube is not
twisted or kinked.
2) The filter is not blocked.
(Remember that when the
door is opened, the internal
parts of the drier and the
washing may be very hot).

OPTIONAL ACCESSORIES

13
If, after all these checks have been
carried out, the appliance still
does not work, inform the nearest
customer service centre.
When contacting the service cen-
tre, inform them of the appliance
model, serial number and type of
fault.
This information will help the ser-
vice centre operator in procuring
the necessary spare parts, thus
guaranteeing a speedy and
efficient repair.
SM1775