Change The Needle - Premier MCO-5424 Manual De Instrucciones

Changing the needle
Turn forward the balance wheel while raising the needle to the high level and lower the presser foot.
Loosen the needle clampl bolt by turning it anti-clockwise. Remove the used needle and insert the new
one with its flat side facing the back.
While inserting the needle, the needle should be pressed as firmly as possible up into the needle clamp,
which should be tightened with a screwdriver.
Note: Regular checking should be done to ensure that the needle is never twisted or blunt.
Knitting materials, fine silk or silk fabrics may frequently encounter knots and skipping
stitches, which are often caused by the damaged needles.
P-11