Button Sewing - Premier MCO-5424 Manual De Instrucciones

Button sewing

(1) Pattern selection dial: B
(2) Stitch length: 0
(3) Stitch width: 3-5 (as long as fit for button sewing)
(4) Presser foot: Button sewing foot
(5) Darning plate: Install the darning plate on the needle plate
Tape the button over the marked position. A pin can be placed on the presser foot to form a stem to
make winding thread around the button easier.
Align both holes of the button with groove slots while placing the left button hole directly under the
needle point.
Low presser foot.
P-28