Buttonhole With Decorative Stitching - Premier MCO-5424 Manual De Instrucciones

Buttonholes with decorative stitching
(1) Pattern selection dial:
(2) Stitch length: (0.5-1)
(3) Stitch width: 3-5
(4) Presser foot: bottonhole foot
1. Raise the foot plate of buttonholes sewing hand the laid in threads on the cam at the back of presser
foot, (1) Positioning cam.
2. Draw forward the end of additional thread under the presser fot and place it under the center of
presser foot.
3. Hold tightly the additional thread na d hook the fork in front of the presser foot.
4. Bring the needle into the fabrics before starting sewing and lower the presser foot.
5. Slowly step down foot controller buttonholes, with each face of buttonholes encasing the laid-in
treads.
6. Take out fabrics and clip sewing thread.
7. Pull the laid-in threads from left side and hold it tightly.
8. The end of thread should be wound to darning needle. Draw the thread to back and clip.
P-32