Cc Wood Dowel - Twin Star Home 26MM9404 Manual De Instrucciones

2. Locate the Left Front Panel (I), Right Front Panel
(J), the completed assembly from step 1. Insert one
Wood Dowel (CC) into each of the pre-drilled holes.
Push the Left Front Panel (I) and Right Front Panel
(J) snug to the completed assembly from step 1.
Make sure the Wood Dowels (CC) are seated in the
pre-drilled holes. Connect the Left Front Panel (I),
Right Front Panel (J) and completed assembly with
Connection Plate, tighten Screws through the
pre-drilled holes.
Hardware Used
CC
Wood Dowel
JJ
Screw
3. Insert one Wood Dowel (CC) into each of the
pre-drilled holes in the completed assembly form
step 2 .Attach the Completed assembly to the
Center Left Side Panel (B) and Center Right Side
Panel (C). Make sure that dowels are seated into the
pre-drilled holes. Using Bolts (AA) and Washers
(BB) attach panels through pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA
Bolt
BB
Washer
CC Wood Dowel
4. Locate Hearth/Base (A) and set out fi nished side up
on the fl oor.
Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Attach the Completed assembly from step 3 to the
Hearth/Base (A). Make sure that dowels are seated
into the pre-drilled holes in the Hearth/Base. Using
Bolts (AA) and Washers (BB) attach panels through
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Insert one Wood Dowel (CC) into each of pre-drilled
holes. Push the Right Side Panel (F) and Left Side
Panel (E) snug to completed assembly. Using Bolts
(AA) and Washers (BB) through the pre-drilled holes
in the mounting blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA Bolt
BB
Washer
CC Wood Dowel
Fig. 2
J
x 4
x 2
Fig. 3
CC
C
x 8
x 8
x 4
Fig. 4
AA
BB
F
x 8
x 8
x 8
5
CC
JJ
I
CC
B
BB
AA
E
AA
BB