IMPORTANT NOTICE
Troubleshooting
Device
Behaviour
Ready Light
All Lights are
Running
Shuts Down
Automatically
If in doubt, kindly refer to online calibration video at
www.presidium.com.sg or feel free to contact us at
service@presidium.com.sg
Potential
Reason
Tip is heating
up
Tip not well
connected
Device in
calibration
mode
Device was
not calibrated
the pressure
on calibration
disk was not
consistent,
or the tip lost
contact with the
calibration disk
too low. Users
are advised
against using
weak batteries
as this will
affect the
calibration
accuracy.
Action to take
Wait up to 15 sec.
Remove and
re-insert tip,
making sure it is
Device ready to
begin calibration
Restart
calibration and
make sure the
pressure is
consistent and
the tip maintains
contact with the
calibration disk
throughout the
depressed tip will
help ensure this.
Change batteries
14