Versions And References - AKO PROPlus 1565 Serie Guía Rápida

Maintenance
Clean the surface of the unit with a soft cloth, water and detergent. Do not use abrasive detergents, petrol, white
spirits or solvents.
Units that include rechargeable electrical accumulators:
This unit includes accumulators that should be replaced when the unit's battery life is under the duration
assigned in its specifications. At the end of the useful life of the unit, the accumulators should be taken to a
selective waste collection centre or returned to the manufacturer.
Cautions
Using the unit not observing the manufacturer's instructions may alter the appliance's safety requirements. Only probes
supplied by AKO should be used for the it to operate correctly.
From –40 ºC to +20 ºC, if the NTC probe is extended to 1000 m with at least 0.5 mm cable, the maximum deviation
will be 0.25 ºC (cable for probe extension ref. AKO-15586).
IMPORTANT:
The function of each probe depends on the "probe setting" par
Ÿ
The AUXILIARY relay is programmable, and its operations depends on the configuration.
Ÿ
The function of the digital inputs depends on the configuration.
Ÿ
The recommended currents and powers are the maximum working currents and po
Ÿ

Versions and references

AKO-15650 2,5 - 4 A
4 - 6,3 A
AKO-15651
AKO-15652 6,3 - 10 A
AKO-15653 10 - 16 A
2,5 - 4 A
AKO-15680
AKO-15681 4 - 6,3 A
AKO-15682 6,3 - 10 A
10 - 16 A
AKO-15683
AKO-15650-1 2,5 - 4 A
AKO-15651-1 4 - 6,3 A
6,3 - 10 A
AKO-15652-1
AKO-15653-1 10 - 16 A
AKO-15651-3 4 - 6,3 A
6,3 - 10 A
AKO-15652-3
AKO-15653-3 10 - 16 A
AKO-15658
-
AKO-15659
3 A
(I+N)
4 A
(I+N)
0.63 - 1 A (III+N)
1 - 1.6 A (III+N)
1 - 1.6 A (III+N)
1-1.6 A (III+N)
-
1.6 - 2.5A (III+N) 10200 W
ameter (See probe configuration on page 21).
7.000 W
10.200 W
7.000 W
10.200 W
1 A
(230 W)
7.000 W
10.200 W
7000 W
10.200 W
7500 W
14
1565H051 Ed.01
2
wers.
NO
NO
YES
400 V / III
50/60 Hz
NO YES
NO NO