D-Link DES-1008P Guía De Instalación Rápida página 2

8-Port 0/00 Mbps Switch with 4 Port PoE
Check Your Package Contents
These are the items included with your DES-008P purchase:
DES-008P
8-Port Fast Ethernet
Switch with 4 Port PoE
Notice Before Setting Up the DES-1008P
To setup of the Switch can be performed using the following steps:
A. Install the DES-1008P in a fairly cool and dry place. See Technical Specification for the
acceptable operation temperature and humidity ranges.
B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and
direct sunlight.
C. Leave at least 0 cm of space at the left and right hand side of the Switch for ventilation.
D. Visually inspect the DC power jack and make sure that it is fully secured to the power
adapter.
Do not stack any device on top of the Switch.
Connecting the DES-1008P Fast Ethernet Switch with 4 Port
PoE to Your Network
A. Power:
Power is supplied through an external DC power adapter. Since the switch does not include
a power switch, plugging its power adapter into a power outlet will immediately power it on.
Quick Installation Guide
DES-1008P
CD-ROM
with Product Document
Quick Installation Guide 48V,.45A Power
Note :
Using a power supply with a different voltage rating
will damage and void the warranty of this product.

Adapter