Technical Specifications - Grillo CLIMBER 8.22 Manual De Instrucciones

Climber 8.22/ Translation of the original instructions
RECOMMENDED LIST OF SPARE PARTS TO BE KEPT IN STORE
2 x mowing blades
2 x blade screws
2 x blade screw nuts
1 x set of belts
1 x engine air filter
1 x engine oil filter
1 x throttle cable
2 x wiring system fuses

TECHNICAL SPECIFICATIONS

ENGINE: - BRIGGS & STRATTON 7220 Professional Series, OHV, 656cc twin-cylinder petrol version
with oil pump.
FUEL TANK: 7 litres – EMERGENCY SUPPLY: 1 litre.
STARTER: electric with 12V battery.
GEARBOX: hydrostatic transmission.
DIFFERENTIAL: lock device with pedal engagement.
CLUTCH: electromagnetic with PTO and blade brake.
SPEED: continuously variable from 0 to 10 km/h + reverse speed from 0 to 6 km/h.
TYRES: front 3.50-6 TRACTOR and puncture-proof treated; rear 18×9.50-8 TRACTOR.
BRAKES: service brakes on the front and rear wheels with pedal engagement; parking brake on the
rear wheels with lever engagement.
SEAT: sprung and adjustable, equipped with roll-bar.
CUTTING DECK: rear/side discharge.
CUTTING SYSTEM: 1 rotating blade.
CUTTING WIDTH: 91 cm (±35,8'').
PERIPHERAL BLADE SPEED: 81 m/sec.
CUTTING HEIGHT: continuously adjustable from 3,5 cm to 11 cm via gas spring.
HOURLY CUTTING CAPACITY: 7000 m²/h
INTERNAL STEERING RADIUS: 60 cm.
STANDARD FEATURE: tow bar, front headlight.
ATTACHMENTS: 125 cm orientable snow blade, snow chains for rear wheels, cm 91 mulching kit.
WEIGHT: 290 kg
SIZE: Length196.5 cm – Width: 99 cm – Height: 98 cm
7