General Characteristics - Astralpool RAMSES Manual De Instalación

For optimum performance of your in-ground housing unit, follow the instructions
below.

1. GENERAL CHARACTERISTICS

In-ground housing unit for a pool is made of injected-polymer reinforced with
fibreglass and a cover.
It houses a 550 _ Áster filter and a Sena 1CV circulation pump.
2. LOCATION
It is advisable to situate the equipment away from the pool, at least 3.5 m from
the edge. During installation, follow IEC international standard 60364-7-702 on
the Requirements for special installations or locations. Section 702: Swimming
pools and other basins.
3. INSTALLATION ON CONCRETE
3.1. Do the excavation in stages.
3.2. Make a properly levelled concrete slab.
3.3. -Position the unit
3 4