Warranty - Dover Hydro Systems SuperDos 20 Manual De Operación

Congratulations on Your Purchase
We make the best and most reliable fluid-driven injectors
available. Our warranty provides the best coverage in the
industry. Hydro Systems will provide for replacement of all
parts proven to be defective in material or workmanship
from the date of purchase for the following periods:
3 The cover and body
years
2 The motor piston assembly
years
1
The lower end (Chemical pump)
year
Hydro Systems products are warranted to be free from
defects in materials and workmanship for the above time
frames. Hydro Systems will at its sole option repair or
replace any component that fails in normal use. Any repairs
made under warranty shall not extend the initial warranty
period.
To Maintain Your Warranty
Your only responsibility is ordinary maintenance - filtering
incoming fluid, replacing the O-ring and dosage piston when
worn. Seals and O-rings are not covered under the warranty.
This warranty is not valid if the defects are found to be
due to the product's misuse, lack of maintenance, fluid
To Return an injector for Warranty or Non-Warranty repair:
See page 3 for Hydro Systems contact information.
1. Thoroughly flush the injector with water of any chemical and drain. Ensure proper packing for shipment.
2. To EXPEDITE warranty evaluation and repair or non-warranty product repair, please include the following:
a copy of the original invoice, serial number of the unit, chemical used, contact information and a Return
Authorization (RA) number, contact your country's Hydro Systems Customer Service to obtain.
3. Send freight prepaid and ship to Hydro Systems or your local distributor. For the name of your local distributor or if
returning to Hydro Systems, contact your country's Hydro Systems Customer Service.
4. For a WARRANTED injector: upon inspection and determination that the unit has defects in materials or
workmanship, the unit will be repaired or replaced at Hydro Systems's option, free of charge and shipped back
freight prepaid.
5. For a NON-WARRANTED injector: upon inspection Hydro Systems or a local distributor will call the customer
with a repair estimate.

Warranty

impurities such as sand or iron, defective installation, freezing,
fluid hammer, abuse, unwanted side effects due to the
chemicals you choose to inject or service provided by anyone
who is not an authorized service provider. Hydro Systems
declines any responsibility if the product is not used in
compliance with the operating instructions and specifications
as indicated in this owner's manual.
Warranty may be void if injector body is disassembled. If
you suspect you are having a problem in the motor piston
assembly or inside the body please contact Hydro Systems or
any authorized repair center to arrange to send the injector in
to be evaluated and/or repaired.
IN NO EVENT SHALL Hydro Systems BE LIABLE FOR ANY
INCIDENTAL, SPECIAL; INDIRECT, OR CONSEQUENTIAL DAMAGES,
WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT.
There is no warranty expressed or implied relating in any way
to products used in conjunction with Hydro Systems.
Hydro Systems or authorized distributor shall not be liable for
incidental or consequential damage, such as any economic loss.
Hydro Systems retains the exclusive right to repair or replace the
product. Such remedy shall be your sole and exclusive remedy
continued...
for any breach of warranty. There are no warranties, expressed
or implied, which extend beyond those described above.
English: 21