Cord Maintenance - RIDGID 1610RVM0 Manual Del Usuario

Maintenance (continued)

Cord Maintenance

When vacuuming is complete, unplug
the Cord and wrap it around the
Powerhead Assembly. If the Power Cord
is damaged, it must be replaced by the
manufacturer or their service agent or by
similarly qualified personnel to reduce the
risk of accident.
Storage
Before storing your Vac, the Drum
should be emptied and cleaned.
The Cord should be wrapped around
the Powerhead Assembly and the Hose
should be stored as described in this
manual. Accessories should be kept in
the same area as the Vac so they can
be readily available. The Vac should be
stored indoors.
SP7094 1610RVM S/E_1610RVM-SE.indd 38
Casters and Wheels
Should your Cart squeak or become hard
to roll, you should place two or three
drops of general purpose oil on each
Wheel at the Axle. If your Casters are
noisy, you may put a drop of oil on the
Roller Shaft to make them quieter.
Frame and Handles
Your Metal Handle is painted to prevent
rust, however, liquids and corrosive
debris should be wiped off with a soft
cloth should they come in contact with
the Handle.
WARNING:
To assure product SAFETY and
RELIABILITY, any other maintenance,
repairs and adjustments should be
performed by Authorized Service
Centers, always
replacement parts.
38
using RIDGID
2/3/19 7:11 AM