Install The Upper Handle; Install The Side Discharge Chute; Set The Cutting Height - GreenWorks Pro MO60L08 Manual Del Operador

1. To free the lower handle (5) from the lock pin (7); hold
the left and right legs of the lower handle and push in
towards the unit.
2. While the lower handle is free of the lock pins, pull up
the top of the lower handle;
3. Engage the bottom handle hole (8) with the lock pin (9) at
both sides;
4. Tighten the handle knobs (10).
WARNING
Do not damage or pinch the cables when you fold or unfold
the handle.
7.3

INSTALL THE UPPER HANDLE

12
11
5
1. Align the holes in the upper handle (3) and the lower
handle (5).
2. Put the cam locks (12) through the holes.
3. Tighten the knobs (11) onto the cam locks.
4. Do the same operation on the other side.
There are two positions to choose while installing the upper
handle.
English
3
12
TIP
7.4 INSTALL THE SIDE DISCHARGE
CHUTE
14
13
CAUTION
When you use the side discharge chute,
• Do not install the grass catcher.
• Keep the mulch plug installed.
1. Open the side discharge door (13) and hold it.
2. Line up the recesses of the side discharge chute (4) below
the pivot (14).
3. Close the side discharge door.
7.5

SET THE CUTTING HEIGHT

The machine can be set to different cutting heights.
1. Pull the height adjustment lever rearward to increase the
cutting height.
2. Pull the height adjustment lever forward to decrease the
cutting height.
9
EN
4