Operating Instructions; Operating Buttons - SKF THGD 100 Instrucciones De Uso

5. Operating instructions

5.1 Operating buttons

The THGD 100 has four operating buttons.
Press for 2 seconds to activate backlight function. The backlight will remain on
for 30 minutes.
MAX
FS
MENU/ZERO and RESET/OK are explained in section 6.
SKF THGD 100
MAX
FS
THGD 100
Press to turn the THDG 100 on or off. The following are
displayed when turning the THGD 100 on:
• LCD segment check
• Full scale pressure (MPa)
• Current Power Off status.
Po off – continuous operation.
Po on – automatic switch off after 30 minutes
• Serial Number and irmware version
MAX/FS
Toggle between maximum (MAX) pressure and
Full scale (FS) indication (100MPa / 14 500 psi).
MENU RESET
ZERO OK
9