V2 AZIMUT Manual De Instrucciones página 17

2.3 Fasten the bracket to the upper crossbeam of the door
using plugs suitable for the type of wall (ø minimum 8 mm).
2.4 Hook the section bar on the bracket using the 6 x 80 ball
stud provided with its self-locking nut.
Screws 6x80 Bracket
In cases requiring the use of the extensions (kit p/n 163203),
assemble the extensions according to the figure provided using
the screws, nuts and washers contained in the kit.
Section Bar
Plug
2.5 Using the reference markings made on the ceiling, identify
the points for fastening the plastic brackets and for the
omega bracket. Drill holes, and using plugs suitable for the
type of ceiling (ø minimum 8 mm) fasten the actuator.
CAUTION: Respect the dimensions indicated in the
paragraph LIMITS FOR USE on page 3.
IT IS PROHIBITED to hang objects of weights on the section
bar or on the motor.
Plug Screw
13
Plastic Bracket
Plug Screw
Omega Bracket