Dyna-Glo DGC310CNP Manual Del Usuario página 14

ASSEMBLY INSTRUCTIONS
15. Place gas cylinder (sold separately) upright
into the notches of the tank support bracket on
the bottom of right legs, orient the cylinder
such that the valve opening faces the right
side of the grill, and the hose is not kinked or
damaged. Loose and slide down tank retention
bracket over LP Gas cylinder collar ,then use
the wing nut to secure tightly. Hand-tighten the
hose/regulator coupling to the threaded valve
of the LP gas cylinder.
Front
Back
15
14
Tank support bracket
Tank retention bracket