Hardware Contents; Preparation - Dyna-Glo DGC310CNP Manual Del Usuario

HARDWARE CONTENTS

AA
M6x12
Bolt
Qty. 30
FF
M6
Wingnut
Qty. 1

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list on previous page and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 50 minutes with 2 people
Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle,
Plier, Adjustable wrench
THIS UNIT IS HEAVY. Two people required for safe assembly.
Two people required for safe assembly. Some parts may contain sharp edges. Wear protective
gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and
use and care instructions before attempting to assemble and use.
BB
Wheel axle
Wheel axle
Wheel axle
Wheel axle
Qty. 2
GG
M6x18
Bolt
Qty. 2
CAUTION
CC
Cotter pin
Cotter pin
Cotter pin
Cotter pin
Qty. 2
HH
M5
Wingnut
Qty. 1
6
DD
M4x12
Bolt
Qty. 6
EE
M6x26
Bolt
Qty. 1